Energy Sotrage High Rate Discharge Battery , Lead Acid Deep Cycle
Battery 12V 135AH
The unique construction and use waterproof battery cable to offer
guarantee for stable operation of solar street lamp products.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting
of a high
porosity, glass fiber material which in conjunction with plates,
totally absorb and
contain the electrolyte.
CGB batteries incorporate a built-in design that controls gas
induces recombination of more than 99% of gases generated during
Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or
add water to
batteries during float service life. In fact, there is no provision
for this type of
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence,
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of
and service life in either float or cyclic applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of
capacity per month.
CGB Batteries may be operated over a broad range of ambient
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep
|Nominal Voltage||12V||Nominal Capacity (C10)||135Ah (10.5V, at 25℃)|
|Nominal Power(15min)||475W/Cell (10.02V, at 25℃)||Weight||Approx. 46.5kg|
|Dimension||Length 345mm||Terminal||FP-29 / RT-22|
|Width 172mm||Internal Resistance||Approx. 5 mΩ (25℃)|
|Height 275mm||Max Charging Current||40.5A (25℃)|
|Total Height 278mm||Max Short-duration Discharge Current||2700A(25℃)|
|Charging Voltage||Standby Use||2.275±0.025V/cell (25℃)||Temperature Compensation||Standby Use||-3.3mV/℃/cell|
|Cyclic Use||2.45±0.05V/cell (25℃)||Cyclic Use||-5mV/℃/cell|
Feature & Advantage
1.The battery is full of power when it’s out of factory, no need to
2.no memory, no need to discharge battery use, suitable for circuit
3.by high partition, adsorption and strong.
4.there is no flowing liquid (poor liquid), does not leak acid and
5.comply with environmental requirements, ease of use.
6.the use of lead-calcium alloys, battery self-discharge is very
7.easy storage, less maintenance.
8.using ABS plastic shell and valve technology for safe use.
Alarm & Security system
Emergency Power Systerm
Fire-safety Emergency System
Banks & Financial Centre
Hospital& Testing Laboratories
Batteries should be stored in dry and clean warehouse which has
Batteries should avoid direct sunlight. Batteries should not be
near to heat
(such as radiator, the distance should more than 1m).
Batteries should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before